[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [PATCH REQUIREMENTS v2 1/7] net-features: Add requirements document for release 1.4
Add requirements document template for the virtio net features. Add virtio net device counters visible to driver. Signed-off-by: Parav Pandit <parav@nvidia.com> --- changelog: v0->v1: - removed tx dropped counter - updated requirements to mention about virtqueue interface for counters query --- net-workstream/features-1.4.md | 35 ++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 net-workstream/features-1.4.md diff --git a/net-workstream/features-1.4.md b/net-workstream/features-1.4.md new file mode 100644 index 0000000..4c3797b --- /dev/null +++ b/net-workstream/features-1.4.md @@ -0,0 +1,35 @@ +# 1. Introduction + +This document describes the overall requirements for virtio net device +improvements for upcoming release 1.4. Some of these requirements are +interrelated and influence the interface design, hence reviewing them +together is desired while updating the virtio net interface. + +# 2. Summary +1. Device counters visible to the driver + +# 3. Requirements +## 3.1 Device counters +1. The driver should be able to query the device and/or per vq counters for + debugging purpose using a virtqueue directly from driver to device for + example using a control vq. +2. The driver should be able to query which counters are supported using a + virtqueue command, for example using an existing control vq. +3. If this device is migrated between two hosts, the driver should be able + get the counter values in the destination host from where it was left + off in the source host. +4. If a virtio device is group member device, a group owner should be able + to query all the counter attributes using the administration command which + a virtio member device will expose via a virtqueue to the driver. + +### 3.1.1 Per receive queue counters +1. le64 rx_oversize_pkt_errors: Packet dropped due to receive packet being + oversize than the buffer size +2. le64 rx_no_buffer_pkt_errors: Packet dropped due to unavailability of the + buffer in the receive queue +3. le64 rx_gro_pkts: Packets treated as receive GSO sequence by the device +4. le64 rx_pkts: Total packets received by the device + +### 3.1.2 Per transmit queue counters +1. le64 tx_gso_pkts: Packets send as transmit GSO sequence +2. le64 tx_pkts: Total packets send by the device -- 2.26.2
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]